×
  1. Home
  2. Videos
  3. How To Prepare a Substrate
  4. Prepare Aluminum, Bare Metal, Galvanized Steel

BACK Prepare Aluminum, Bare Metal, Galvanized Steel

Prepare Aluminum, Bare Metal, Galvanized Steel
02:12

#1: Thoroughly degrease the substrate with a solvent-based degreaser: U-POL WIPE#6 or System 20. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade aluminum, bare steel or galvanized with 180 grit.
#3: Once abraded, degrease again.
#4: Wipe the substrate with a tack rag. You are now ready to apply RAPTOR 2K Epoxy Primer.
#5: Read the instructions leaflet contained on the lid of the aerosol.
#6: After 24 hours, abrade with 400 grit before top coated.

Don't miss out our TOP TIPS!

Download

Suggested Videos